This specification is for a Clear Roads approved Potassium Acetate that will provide a product that is compliant to the Clear Roads Specification, and as designated within this specification. Clear Roads specifications and test methods can be referenced at https://clearroads.org/download/cr-qpl-guidance/. In addition to the General Specifications the following requirements shall also apply: Product must contain no less than 50% potassium acetate. Weight per gallon will be established according to the specific gravity and percentage of potassium acetate contained in the product bid as indicated by the bidder. The pH must be 9.5 – 10.5 This chemical product shall not contain greater than 1.0% (V/V) Total Settleable Solids and shall have Ninety-nine percent (99.0%) of the Solids Passing through a Number 10 sieve after being stored at -17.8°C +/- 1°C (0°F +/- 2°F) for 168 hours (Seven days). The successful vendor of any product that is delivered and/or applied, which is found to be contaminated and is cause for environmental concerns, shall be responsible for all clean up expenses. This includes but is not limited to clean up measures as needed for the following: Storage facility Maintenance yard Equipment Roadside
