1. Surface Preparation: o Scrub all surfaces with a heavy-duty degreaser to remove laitance, mold, fungi, organic pathogens, and other contaminants. o Sandblast the pool surface to remove loose coatings, sand smooth any areas not fully removed, and patch cracks using TNEMEC 217-218-215 epoxy. o Dispose of all debris such as paint chips, dirt, and blasting sand. o Perform acid-washing and power-washing of blasted surfaces to ensure proper cleaning. 2. Paint and Caulking: o Apply a Prime Coat of TNEMEC Series 161 Hi-Build Epoxoline II. o Apply two Finish Coats of TNEMEC Series 161 Hi-Build Epoxoline II (3 mil per coat). o Add 5 lbs of 50 mesh Ottawa silica sand to both coats for areas including zero entry and step areas. o Remove and replace all caulking from joints of pool up to the back edge of copping around pool including around and under return gutters. 3. Tile Removal and Painting: o Remove all tiles, grind smooth, and patch with epoxy where necessary. o Colors for TNEMEC High Build Epoxy Paint Series 161 will be specified by the City. 4. Play Structure Repainting: o Media blast and repaint all metal surfaces of the play structure. o Repair and repaint the play structure in the zero-entry area. o Move existing poles to fit position of new tube slide to be replaced by contractor. o Replace all or broken sections of slide to bring into compliance...
