Trailer Washer: • Hot water pressure washer • 3000 PSI at 5.6 GPM • General pump, belt drive with 12V pump drive clutch • Pressure trapping unloader valve • Minimum 16.8 HP Kubota diesel, water-cooled (or similar) with electric start • Minimum 7-gallon fuel storage for engine • Hour meter • Water fuel separating fuel filter • #2 Fuel oil Beckett Burner, with minimum 10-gallon fuel storage tank • Adjustable temp control • Stainless steel combustion chamber • Schedule 80 boiler steel coil • Boiler must achieve a 150 degree temperature rise above inlet temperature • Heavy-duty skid base • 100-foot high-pressure hose, rated at 4000 PSI • Two (2) heavy-duty pressure guns; one – 4-foot and one – 6-foot • Equipped with upstream chemical injector • 200-foot heavy-duty Nyrim fixed rose reel • Water supply tanks: 400-gallon minimum poly water tank • Supply tanks fast-drain with winterization valve on pressure washer • Trailer tank by-pass valve: Pump water by-passes to tank when not in use • Capable of recirculating heated water to avoid freezing in low temp situations • Quality-built tandem-axle trailer: Dexter 3500-lb axles (or similar) • Electric brakes, both axles • Adjustable-height pintle hitch • 15-inch tires, properly rated for axles • DOT regulation trailer lighting • Steel storage compartment located below water tanks, for gun, wand, hoses, parts and accessories • Provide Free of Charge First Scheduled Preventive Maintenance by qualified factory trained service technician – Change all fluids in pump and engine along with thorough check of unit for minor adjustments.