The Work shall include providing all labor and materials for the Upgrade/Renovation of JIPSD PS-17 including: Coordinate all ancillary work with JIPSD for temporary by-pass pumping. Furnish and maintain all required temporary by-pass pumping equipment. Demolition and removal of designated electrical and mechanical equipment and other designated components for JIPSD salvage. Remove existing pumps and electrical panels for JIPSD salvage. Furnish and install all labor and materials for temporary erosion control measures, tree trimming, miscellaneous site work, and appurtenances, complete as indicated and specified. Install new Owner Supplied duplex submersible pumps and Pump Control/SCADA-RTU Panel. Furnish and install all conduit, wiring, valves, materials, labor and ancillary appurtenances necessary to install all Owner Supplied Equipment (OSE). Furnish and install new above grade discharge ductile iron piping as indicated. Repair existing wet well interior concrete surfaces and furnish and install new wet well linings and interior riser piping coatings. Furnish all labor and materials for new cast-in-place concrete slabs. Furnish and install all ancillary electrical level controls, new SCADA antenna pole, antenna, conduit and wiring, and ancillary electrical service panels, pipe painting, and furnish and install all piping to the existing force main point of connection. Furnish and install new electrical equipment rack, all primary electrical service conduit from Dominion point-of-service, and pay for all Dominion costs to upgrade the existing electrical service. Furnish all labor and materials for new Site Work including repair and reconstruction of asphalt concrete surfaces where indicated.
