(CU 201151) 1-1/4 INCH IPS SDR 10 BUTT FUSION CAP PER THE FOLLOWING SPECIFICATIONS: 1. SHALL BE YELLOW PE2708 MEDIUM DENSITY POLYETHYLENE. 2.SHALL BE A MOLDED END CAP FITTING SUITABLE FOR BUTT FUSION CONNECTIONS. 3.SIZE: 1-1/4 INCH IPS SDR10. 4.ALL FITTINGS SHALL HAVE TRACKING AND TRACEABILITY INFORMATION PER LATEST REVISION OF ASTM F2897; (CU 201174) 2 INCH IPS SDR 11 BUTT FUSION CAP PER THE FOLLOWING SPECIFICATIONS: 1. SHALL BE YELLOW PE2708 MEDIUM DENSITY POLYETHYLENE. 2.SHALL BE A MOLDED END CAP FITTING SUITABLE FOR BUTT FUSION CONNECTIONS. 3.SIZE: 2 INCH IPS SDR 11. 4.ALL FITTINGS SHALL HAVE TRACKING AND TRACEABILITY INFORMATION PER LATEST REVISION OF ASTM F2897. 5.SHALL MEET THE REQUIREMENTS OF ASTM D2513-12ae1 AND THE LATEST REVISION OF ASTM F2897, ASTM D3261 AND ASTM D3350.; (CU 00201215) 1-1/4 INCH IPS SDR 10 PE 2708 PLASTIC PIPE IN 500 FEET COILS 1: *PIPE TO MEET OR EXCEED CELL CLASSIFICATION 234373E PER LATEST REVISION OF ASTM D3350. 2. MANUFACTURE DATE MUST BE NO MORE THAN 12 MONTHS OUT UPON DATE OF DELIVERY. 3. ALL PIPE SHALL MEET ASTM D2513- 12ae1, STANDARD SPECIFICATION FOR POLYETHYLENE (PE) GAS PRESSURE PIPE, TUBING, AND FITTINGS. 4. ALL PIPE MUST COMPLY WITH CODE OF FEDERAL REGULATIONS TITLE 49 PART 192 5. THE POLYETHYLENE SOURCE RESIN SHALL HAVE A PPI TR-4 INDEPENDENT LISTING, AND THE PIPE MANUFACTURER SHALL MAINTAIN A DEPENDENT LISTING, ALSO IN CONFORMANCE WITH PPI TR-4.; (CU 00201220) 2 INCH IPS SDR11 PE2708 PLASTIC PIPE IN 500 FEET COILS 1: *PIPE TO MEET OR EXCEED CELL CLASSIFICATION 234373E PER ASTM LATEST REVISION OF D3350. 2. MANUFACTURE DATE MUST BE NO MORE THAN 12 MONTHS OUT UPON DATE OF DELIVERY. 3. ALL PIPE SHALL MEET ASTM D2513- 12ae1, STANDARD SPECIFICATION FOR POLYETHYLENE (PE) GAS PRESSURE PIPE, TUBING, AND FITTINGS. 4. ALL PIPE MUST COMPLY WITH CODE OF FEDERAL REGULATIONS TITLE 49 PART 192 5. THE POLYETHYLENE SOURCE RESIN SHALL HAVE A PPI TR-4 INDEPENDENT LISTING, AND THE PIPE MANUFACTURER SHALL MAINTAIN A DEPENDENT LISTING, ALSO IN CONFORMANCE WITH PPI TR-4.
