1.1 DIMENSIONS 1.1.1 GVWR- 40,000 LBS. MINIMUM 1.1.2 BACK OF CAB TO AXLE (CA) APPROXIMATELY 108” (SUITABLE FOR 12 FT DUMP BODY) 1.1.3 WHEELBASE (WB) APPROXIMATELY 177” 1.1.4 FRONT BUMPER TO BACK OF CAB (BBC) APPROXIMATELY 107” 1.1.5 INTEGRAL FRAME- 120,000 PSI YIELD 1.1.6 SINGLE FRAME PREFERRED 1.1.7 RESISTING BENDING MOVEMENT (RBM) – 2,000,000 INCH LBS. MINIMUM 1.1.8 FRAME EXTENSIONS 1.1.8.1 ONLY IF REQUIRED BY THE BODY MANUFACTURER 1.1.8.2 FULLY WELDED, NO BOLT-ON EXTENSIONS, 24” INTEGRAL. 1.2 BRAKE SYSTEM 1.2.1 AIR SYSTEM, S-CAM-TYPE BRAKES, FRONT BRAKES SHALL BE 16.5” X 6”, REAR BRAKES SHALL BE 16.5” X 7” 1.2.2 DUAL AIR RESERVE TANKS WITH DUAL GAUGES 1.2.3 AIR COMPRESSOR, 18.7 CFM 1.2.4 AIR DRYER, HEATED (UNIT SHALL BE PAINTED AT FACTORY, NO UNDERCOATING SHALL BE APPLIED) 1.2.5 MOISTURE EJECTOR, AUTOMATIC 1.2.6 ROCKWELL FRONT SLACK ADJUSTERS, OR COUNTY-APPROVED EQUIVALENTS, AUTOMATIC ADJUSTING STYLE 1.2.7 ROCKWELL REAR SLACK ADJUSTERS, OR COUNTY-APPROVED EQUIVALENTS, AUTOMATIC ADJUSTING STYLE 1.3 ENGINE 1.3.1 DIESEL, 350 GROSS HP, TURBOCHARGED AIR TO AIR INTERCOOLED, WET SLEEVE, APPROX. 1,000 FT LBS., GROSS TORQUE @ 1,400 RPM. CUMMIN ISL NO EXCEPTIONS. 1.3.2 REAR SUMP OIL PAN PREFERRED. A FRONT SUMP OIL PAN SHALL PROVIDE ADEQUATE SNOWPLOW HANGER CLEARANCE 1.3.3 ENGINE SHALL BE MOST RECENT YEAR EPA/GHG14 COMPLIANT AND CERTIFIED. NONCOMPLIANT CERTIFICATIONS SHALL NOT BE ACCEPTED. EPA COMPLIANT CERTIFICATION SHALL BE PROVIDED WITH THE BID RESPONSE. 1.3.4 FIVE (5) YEAR 100,000 MILE WARRANTY
