A. Work under this Section shall consist of the careful removal, storage for reuse, transportation off-site, or demolition, of all structures and site features encountered or noted to be removed or abandoned to a minimum of three feet below finished grade, and the removal and disposal of all materials not called for to be reused or salvaged, in accordance with the contract drawings, these specifications, and Owner’s Representative’s requirements. Provide all labor, equipment, materials and transportation necessary to complete the work. B. Items plan referenced to be removed and stored shall be carefully removed and stored on site in a manner and location designated by the Owner’s Representative for reinstallation later as shown on the plans or as indicated by the Engineer. C. Items plan referenced, or as indicated by the Owner’s Representative to be removed and disposed of shall be removed from the site and properly and legally disposed of by the Contractor. D. Items indicated on the contract drawings or in the specifications to be removed and salvaged, or other items required to be removed by the Owner’s Representative, shall be transported to a municipal storage facility, located within the City confines, and unloaded and stacked as required by the Engineer. E. Items indicated on the contract drawings or in the specification to be removed and reset shall be carefully removed and reset in the same location as existing according to the specification and details. F. The following scope describes the general demolition requirements of this Section. 1. Cement concrete and hot mix asphalt pavements 2. Gravel 3. Loam 4. Curbing 5. Loading Area Retaining Walls 6. Two Trees 7. Other features as indicated on the drawings.
