Following required specifications - 1.2.1 An enclosed cab with air conditioning and heat. 1.2.2 Two-speed hydrostatic transmission 1.2.3 Self-leveling, dual level suspension undercarriage on rubber tracks 1.2.4 Roller-mesh final drive sprocket located above and forward of the rear roller 1.2.5 Roller, sprockets, bogies and drives covered by armor plating 1.2.6 The loader shall come equipped with an electro/hydraulic implement control, 1.2.7 Electro/hydraulic hydrostatic transmission control 1.2.8 Hand and foot throttle, 1.2.9 Electrical system: a minimum 12-volt, 100 ampere alternator, gauges, operator warning system indicators 1.2.10 Cloth seat with ergonomically contoured armrest and a control interlock system for safety purposes. 1.2.11 Shall be equipped with a Tier IV compliant diesel engine with no less than 95 net HP @ 2500 RPM, SOS Sampling valves, Engine Oil and Hydraulic Oil, Tilt up Radiator/Hydraulic Oil Cooler, Lockable Engine Enclosure, 4 Machine Tie Down Points which insures the machine is properly secured to the trailer. 1.2.12 The loader shall include ballistic resistant glass and operator control station 1.2.13 Loader shall have a foldable or removable rear personnel platform...
