All season dump body, 12 ft body length, constructed of 7-gauge 201 stainless steel unless otherwise indicated. Specifications noted below are based on a Viking Proline model PL1011SD. Dump body with 201 Stainless Steel with a ¼” HARDOX 450 floor and conveyor cover, 7 gauge 201 SS sides and front with 30” sides and 39” tailgate height, 1/2 cab shield, 7 GA 201 SS six panel tailgate with air controlled latch, bolt on stainless steel asphalt apron, CS90-5-3 front telescopic hoist and side tip indicator. Emergency lighting consisting of 4 LED Amber flashers in cab shield, 2 facing forward and 2 facing to the side, 2 LED Amber flashers in rear corner post with LED STT and back-up, LED spinner & load lights, two LED back up/spot lights installed at the rear of the truck, shovel holder, reflective tape on sides and tailgate, Roll-Rite hydraulic load cover installed with asphalt tarp, LED ICC lighting, stainless steel fold down ladder with step inside body, body prop, body up alarm, poly rear fenders, four flaps mounted on stainless steel brackets, center cross flap, body grease fittings piped to central location, installed and operational. Central hydraulic system consisting of a transmission driven hot shift PTO with a direct mount Rexroth LS variable displacement hydraulic pump, Rexroth stack type load sense valving mounted in a above frame combination 40-gal steel tank/valve enclosure to control plow, body, load cover, prewet and spreader, Dell air controls, Rexroth CS630 spreader control, 10 micron return filter, 2” shut off, low oil warning system, stainless steel lines front and rear, hoses and couplers, complete system installed and operational. Viking 90 gal prewet tank mounted vertically on front headboard with a Rexroth prewet pump mounted in an enclosure controlled by the CS630, all hoses and couplers installed and fully functional.
