4.1.RACK SYSTEM MUST BE COMMERCIAL GRADE AND INCLUDE THE FOLLOWING: 4.1.1. At least four (4) storage shelves on the rack system for plates, kettle bells, and medicine balls 4.1.2. At least two (2) storage panels to hang attachments 4.1.3. Removable lat pulldown seat with low row kit 4.1.4. Upright barbell storage mount on rig 4.1.5. Combines fold back arms with two independent high/low swivel cable-pulley system to allow crossover movements from high to low positions 4.1.6. Fold back rack using a hinge-and-pin system in the middle of the rig as a full power rack as a standard 2-upright fold-flat Measurements should be 41.5” depth, 100” height 4.1.7. All systems (rack/rig/cable) to be manufactured in the USA 4.1.8. 43” wide 11-gauge steel storage panels between rack and cable system on both sides 4.1.9. Height to be approximately 107.5” 4.1.10. Rack panel width to be approximately 43” 4.1.11. Rack length to be approximately 145” 4.1.12. Rack frame width to be approximately 34” 4.1.13. Rack width to be approximately 47.5” 4.1.14. Should have the ability to allow for a minimum of three people to use the rack simultaneously 4.2.TWO (2) UNIVERSAL THREE TIER STORAGE SYSTEM 4.2.1. System should have wheels made with 11-gauge steel 4.2.2. One rack should hold 5-50lb dumbbell set, one rack should hold 55-100lb dumbbell set 4.2.3. Dimensions to be approximately 76.5”W x 23.75”D x 45.25”H 4.2.4. Options of kettle bell and /or medicine ball shelf 4.3.NON-MOTORIZED TREADMILL 4.3.1. LCD Display with Group/Circuit Mode 4.3.2. Weight Capacity- 350lbs 4.3.3. Approximate 3% curvature 4.3.4. Unit dimensions approximately 67”X34”x70” 4.3.5. Running surface approximately 62”x17” 4.4.OLYMPIC PLATES 4.4.1.One (1) Pair 2.5-pound plates 4.4.2.Two (2) Pairs 5-pound plates 4.4.3.Two (2) Pairs 10-pound plates 4.4.4.Two (2) Pairs 25-pound plates 4.4.5.Two (2) Pairs 45-pound plates 4.5.OLYMPIC BUMPER PLATES 4.5.1.Two (2) Pairs 10-pound plates 4.5.2.Two (2) Pairs 25-pound plates 4.5.3.Two (2) Pairs 35-pound plates 4.5.4.Two (2) Pairs 45-pound plates
