Wood Duck Boxes - One (1) inch #2 dried rough cypress (1" x 10" and 1" x 12") - With the exception of the side door, all sides shall be a single board - Hot dipped galvanized ring shank nails will be used (24 per nest box) - 4" wide by 3" tall diameter oval hole will be used for the entrance/exit hole in the front of the box - 5 (5) 3/8" diameter holes will be used for drain holes in the bottom of the box - One (1) 1/2" hole is required in the center of the back board above the top of the box - The inside front of the box must be roughened - If needed, an example woodduck nest box will be available for your inspection - A sliding door will be used on the box per the example box - All doors must slide to the front of the box when opened - Half of the order will have doors on the right-hand side of the box and half of the order will have doors on the left-hand side of the box. This bid is for exactly 284 boxes.
