A. Paint Booth that is in legal compliance with all applicable laws. B. A frame/unibody dedicated bench system with straightening capabilities. The Contractor shall have adequately trained personnel to use the unibody bench system. The bench system shall be capable of making multiple body and structural pulls for straightening. Contractor shall also have the following available: i. An electronic measuring device capable of providing before and after measurements including a computerized print out. A copy of the print outs to be given to the City representative. ii. An inside storage area for police and other vehicles which contain electronic equipment. For the purpose of this specification “inside storage” includes storage within a secured area, which could include a locked and fenced area acceptable to the City. iii. The Contractor awarded the truck portion ofthe contract must also have the capability to do body and paint work indoors during inclement weather. The indoor area must be large enough to handle trucks requiring a minimum 13- foot height clearance. iv. A MIG and TIG welder or other electric spot welding equipment for body welding. Gas welding is not acceptable. The Contractor shall ensure that the vehicle computer systems are disconnected from the vehicle before any welding is done. The Contractor is to replace at Contractor’s expense, any vehicle on board computers damaged by not disconnecting the computers before any welding operations. C. The work proposed in this Contract shall be performed at the Contractor’s place of business. D. At the City’s option, used parts may be used depending on the age and value of the equipment being repaired. E. Contractors agree to assume full liability and responsibility for all vehicles and contents (including radios and other standard or installed equipment), placed in its custody by the City under this Contract. F. This Contract shall cover the following types of vehicles: i. Passenger vehicles (sedans, light trucks up to 14,500 GVW and similar equipment such as vans etc.), including fiberglass work. ii. Trucks and Buses (over 14,500 GVW), including fiberglass work.
