Mowing Mechanically mow all turf areas and mowable natural areas within the limits of the Project Site as often as required to maintain a neat appearance and an appropriate height for the specific turf grass at the Landscaped Location ). Visually inspect all mowable areas at each visit for leaves, debris, litter and trash. Remove any leaves, debris, litter and trash from the lawn areas at each visit, prior to each mowing. Maintain turf height at a height ranging from two (2) inches to three (3) inches. Prior to mowing, remove all objects that could become a hazard if struck by mowers, such as litter, debris, trash bags, large cardboard boxes, mattresses, pillows, tires and recap pieces, pinecones, etc. Sweep or blow pavement areas after each mowing. Mowing areas that are saturated with water or where standing water is present is prohibited. Mowing operations are prohibited when conditions are such that turf damage would occur or tire ruts will be left. See “Line Trimming”. Chemical control of turf is prohibited. Contact the Engineer and receive Department approval prior to performing any chemical control of weeds. Miscellaneous Mowing Requirements: Mow along the highway right of way in the direction of traffic. Perform all handwork required to effectuate an efficient mowing operation. The Engineer shall have the right to identify for the Contractor those areas where handwork shall be required. Take the necessary precautions to prevent any debris (including grass clippings) from being thrown onto paved surfaces or into shrub beds by the mowing equipment or the Contractor’s personnel.
