1. FABRIC: 9 gauge galvanized 2” mesh, knuckle and knuckle top and bottom. Bottom of fabric to be left 2” above ground. Class One – 1.2 oz. per square foot. 2. TOP RAIL (GALVANIZED): 1 5/8” O.D. schedule #40 pipe or SS40 pipe. 21” lengths joined with 1 5/8” sleeve. 3. LINE POST (GALVANIZED): 4’ and 6’ height: 2” O.D. schedule #40 pipe or SS40 pipe. Line posts set 10’ on center maximum spacing. Cast in concrete: 10” diameter, 30” depth. 8’ and 10’ height: 2 1/2” O.D. schedule #40 pipe or SS40 pipe. Line posts set 10’ on center maximum spacing. Cast in concrete: 12” diameter, 42” depth. 12’ height: 3” O.D. schedule #40 pipe or SS40 pipe. Line posts set 10’ on center maximum spacing. Cast in concrete: 12” diameter, 42” depth. 4. TERMINAL POST (GALVANIZED): 4’ and 6’ height: 2 1/2” O.D. schedule #40 pipe or SS40 pipe. Cast in concrete: 12” diameter, 42” depth. 8’ and 10’ height: 3” O.D. schedule #40 pipe or SS40 pipe. Cast in concrete: 12” diameter, 42” depth. 12’ height: 3” O.D. schedule #40 pipe or SS40 pipe. Line posts set 10’ on center maximum spacing. Cast in concrete: 12” diameter, 42” depth. 5. GATES (GALVANIZED): (4’ single walk gate and 12’ double drive gate): Framework – 2” schedule #40 pipe or SS40 pipe. Gates braced and trussed as necessary. Same fabric as fence. 6. GATE POSTS (GALVANIZED): 4’ and 6’ height: 2 1/2” O.D. schedule #40 pipe or SS40 pipe. Cast in concrete: 12” diameter, 42” depth. 8’ height: 3” O.D. schedule #40 pipe or SS40 pipe. Cast in concrete: 12” diameter, 42” depth. 10’ and 12’ height:4” O.D. schedule #40 pipe or SS40 pipe. Cast in concrete: 12” diameter, 42” depth. 7. FITTINGS (GALVANIZED): Beveled brace band and carriage bolt, pressed steel rail-end 2 hole, pressed steel loop cap, malleable cap 3/16” x ¾” tension bar, beveled tension band and carriage bolt. 8. TIE WIRE: 6 ½” 9 gauge aluminum tie wire spaced 15” on center for line posts and 24” on center for rails. 9. BOTTOM TENSION WIRE: 7 gauge galvanized coil wire, ringed with 9 gauge galvanized steel hog rings at 24” on center. 10. POST FITTINGS (GALVANIZED): Truck poured concrete (2500 PSI) 11. VINYL COATING: Fabric will be 9GA, core thermally fused and bonded (2B). Framing will be SS40 only, PVC coated 10-14 heavy mill. No schedule 40 to be used with coating.
