Provide and install Sensor System on perimeter fence Fence perimeter is 6,157' Fiber length approx 10,000' Senstar FP115005U preferred but other brands will be considered New Fiber Patrol hardware FP1150 unit (replaces FP1400-08 controller and processor units) FP1150 per meter licensing. The FP1150 platform is licensed per meter as opposed to the 8 zone limit of the FP1400-08. The FP1150 allows for 1440 defined zones and is licensed from 1Km (included) to 40Km, based on perimeter length and amount of fiber attached. Fiber Patrol connection unit – for connecting the new FP1150 unit to the existing, installed, fence mounted fiber Operator Interface System: - Senstar Symphony V7, common operating platform with 52 camera licenses. - This system was put in place to connect the perimeter fence with certain IP cameras that were, or had been installed. These cameras were associated to specific zones of the fence system and would pop up on the operator monitor when a fence zone went into alarm. Additionally, the Symphony map would change from green line to red line to graphically display the zone of alarm.
