Jacket • Outer Shell – Gemini XT, Black • Moisture Barrier – Gore RT 7100, 3D • Thermal Liner – Quantum 3D SL2i • Reinforced Padded Elbows • Standard Thermal Padding in Shoulders and Upper Back • Nomex hand and Wrist Guards Sewn to the Liner (Standard Assembly) • Cargo / Handwarmer Pocket with Nomex (Fleece Lined) • Standard Zipper and Velcro Closure • Radio Pocket Sewn on Left Chest 3”x3”x9” with Antenna Notch on Left and Right • Reinforced Radio Pocket (Bottom Only) • Mic Tab Sewn on 5” Above Radio Pocket • Mic Tab Sewn on Right Side 1 3/4” Above Flashlight Hook • Survivor Flashlight Holder Right Chest 1/2” off the Storm Flap • Small D Ring Sewn 2 ¾ “ off the Flashlight Holder Clip • Cuff Trim Reinforced • NYC 3” Lime Triple Trim • DRD – Drag Rescue Device as Required by NFPA • “FORT MILL” Sewn Straight Across on Upper Back in 3” Letters • Hanging Tail Extended Coat with Liner to Match • 4” Velcro Panel for Name with Velcro to Match on Tail of Coat (3” Letters) • 4” Velcro Panel for Rank with Velcro to Match above the 2nd Stripe of Triple Trim (3” Letters) • Install Loop on Both Sides of the Coat to Accommodate an Anti-Sway Strap a Portable Radio. Must be Made of Gemini XT Black and Sewn on to the Coat. • Velcro at neck attaching liner to shell must be 1” in width. Pants • Outer Shell – Gemini XT, Black • Moisture Barrier – Gore RT 7100, 3D • Thermal Liner – Quantum 3D SL2i • Kevlar Reinforcement on the Inside of the Pockets • Reinforced Knees • Reinforced Cuffs • Reinforcement on the Outside of the Pockets to the Velcro Closure, complete coverage of the exterior of the pockets. • Flap on the Right-Side Pocket will be 8” with Full Velcro and a Grab Handle • Full Length Velcro on all Pockets • Standard Padded Suspenders • Belt Loops Sewn onto the Pants what will Accommodate the Sterling – Bolt Belt – Escape Belt • Pocket on the Right Leg must Accommodate the EVAC System EP-439 Bailout System • 3” Triple Trim around Cuffs • Extra Knee Padding behind Reinforcement • Full reinforcement on the outside of the pockets. • Install loop on center rear of the pants to accommodate an Anti-Sway strap for a portable radio. Must be made of Gemini XT Black and Sewn on to the pants.
