The City of Bryan requires the following specifications to be included in a comprehensive and itemized scope of work report for the replacement of our existing bulkhead at the Bryan Aquatic Center. Structure • Structure to be stainless steel • Structure to be flow-through and wave quelling • Top trim sections to be white high-density polymer with energy absorbing orifices. • White high-density polymer cladding with permanent black target markings on vertical and horizontal surfaces. • All cladding on vertical and horizontal surfaces must be fully flow-through and be certified slip-resistant under ASTM C1028 • All material, equipment, supervision, insurance, and other items necessary to manufacture an install a complete working system in the dimensions, sized and configuration must be included. Current Bulkhead Measurements and Specifications • Nominal Length (inside pool dim): 62.250ft • Width: 48 Inches • Overall Height: 63.500” • Hight above water: 9.500” • Height below water: 54.00” • Carriage Cantilever (each end): 14.00” • Bulkhead anchor points: 1 each side • Racing lane target markers: 8 each side • Racing lane anchors: 12 each side • Starting Platform Anchors: 16 each • Starting Platforms: 8 Bulkhead Materials and Work Included, Construction and Features • Type 316L Stainless Steel Truss Structure • White High-Density Trim • GPM Polymer Grating on Horizontal Walkway Surface • GPM Polymer Grating on Vertical Turning Surface • Racing Lane Targets
