ITEM #1 – ASPHALT ROOFING: Does not include front porch roof as that will be removed by homeowner. *** Please note the two metal roofs on bump out on front of home are not included in this project. The contractor will not work on or remove those areas. 1. Tear off existing roofing down to original deck boards. (Re sheet if necessary using 7/16'' osb or plywood.) Install ice and water shield at the eves of deck to extend up a minimum of 2ft'. Cover remaining roof deck with 15# felt. Install new edge metal, and use a minimum of 240 pounds per square, limited lifetime shingle. Ridge vent to be installed at peak and provide 50% free ventilating area. Color to be Georgetown Gray from Certainteed Landmark Collection. Must leave 1 full bundle of shingles with homeowner after job is complete. 2. Remove existing chimney down to below roof line, patch in decking as needed. Flat Roofing Areas: All areas, except rear entry roof as that portion of the structure will be razed in the near future. 1. Remove existing roof. Inspect roof deck, install new 1/2” fiberboard to deck. Install new EPDM or TPO type roofing, minimum thickness to be .45mil. All seems and flashing details to be done according to the manufactures specs. ITEM #2-RE-SHEATH OPTION IF NEEDED
