1. All transformers shall be supplied from a USA electrical products manufacturer. 2. All transformer units shall be of equal size and standard. 3. Transformers can be new or rewound. 4. Refurbished: Rewound or remanufactured transformers are acceptable if they meet all technical requirements. 5. Transformer Color: Green 6. Steel housing complete with sill and lifting lugs, stainless hardware, hinges, and Penta head entry with padlock hasp; 7. Munsell green painted finish suitable for a marine environment; 8. Tank ground connection with lug; 9. Pressure Relief Valve; 10. Drain valve and fill plug; 11. Primary Terminals – 15kV, 200A bushing well with replaceable stud, inserts installed (ANSI C57.12.38); parking stand; bay-o-net fusing with ELSP current limiting fuse; 12. Secondary Terminals – copper stud bushings with 8-hole secondary spade terminal, removable ground strap; 13. Nameplate meeting ANSI C57.12.00 including wet and dry weights, oil capacity, non-PCB label; 14. Primary and secondary terminals labeled; 15. ANSI Z535 reflective “Warning” and “Danger” sign; 16. Exterior door labeled with kVA rating and secondary voltage; and 17. Spare Penta bolt
