Washer Procure and install new commercial washer-extractor with an 80lb. capacity or equivalent. Bidder must specify manufacturer, model, capacity, and warranty information on pricing page. Additional Required Washer Specifications: Back-lit LCD display Single-motor inverter drive Tall, lifting ribs Tapered roller bearings Large cylinder perforations Fresh-water flushing chemical manifold Auto tension V-belt drive Six (6) liquid chemical injection ports Control reads in English 5-year limited warranty on frame, cylinder & shell Dryer Procure and install new commercial gas dryer at 95lb capacity or equivalent. Bidder must specify manufacturer, model, capacity, and warranty information on pricing page. Additional Required Dryer Specifications: 22.50 cu. ft basket volume 350,000 Btu/hr heat input, 2,700 cfm airflow Radial Airflow Steel door with gasketless glass 16” diameter vent connection Min 31” door Four-Point Roller Support System Stainless steel basket Reversing basket Contractor is responsible for delivery, uncrating, assembling and installation of the washer & dryer. Contractor is responsible for moving the washer and dryer from the delivery vehicle to the laundry room. No stairs involved in the transport route. The delivery vehicle can be positioned within 30 feet of the laundry room on a flat surface. A direct path with no turns required between the vehicle and the laundry room entrance. Contractor will remove all trash from site and dispose of properly off site. Final electrical connection to be performed by contractor. Final gas connection to be performed by contractor. Final venting connection to be performed by contractor.
