2.1 Setting of Motors a) The setting of motors shall include the following: 1) Placing motors on bases 2) Connection of drive transmission devices 3) Grouting/repair of bases 4) Fabrication of new equipment bases 2.2 Alignment Services a) The alignment services shall include the following: 1) Mechanical, Optical, and Laser alignments b) Typical plant equipment to align: 1) Motors to pumps 2) Motors to fans 3) Motors to process equipment 4) Turbines to generators 5) Gearboxes to/from equipment 2.3 Vibration Analysis a) Vibration analysis of the following equipment: 1) Motors 2) Pumps 3) Compressors 4) Fans/Blowers 5) Turbines b) Vibration analysis reports shall be furnished to WPC upon request. Reports shall be in feet per second peak unless otherwise specified. 2.4 Crane and Rigging Services a) Crane and rigging services shall include: 1) Rental, scheduling, and coordination of crane and rigging equipment 2.5 Mechanical Services a) Mechanical services shall include: 1) Maintenance and repair of rotating and reciprocating equipment 2) Diagnostics and repair of critical process equipment such as compressors, blowers, fans, turbines, and pumps b) Provide engineering services and design services to assist, participate and oversee services listed above and provide recommendations to the City.
