(CU 106220) 15 AMP TYPE "K" EEI-NEMA FUSE LINKS. (CU 149156) 2-1/2' X 2", UPSWEEP MAST ARM. * HOT DIPPED GALVANIZED STEEL STREET LIGHT BRACKET. * BRACKET TO HAVE 2 INCH PIPE AND SLIP FITTER DIAMETERS. * BRACKET SHALL BE 30 INCHES LONG AND DESIGNED TO SUPPORT A LUMINAIRE WITH MAXIMUM WEIGHT OF 70 POUNDS. (CU 107022) SINGLE 8', SINGLE MEMBER, TUBULAR STEEL, GALVANIZED LUMINAIRE MAST ARM ACCEPTING 2" SLIPFIT ROADWAY LUMINAIRES WITH MAXIMUM WEIGHT OF 75 LB. AND HAVING A RISE OF 3' 6". THE MAST ARM SHALL ATTACH TO A ROUND GALVANIZED STEEL ROADWAY LIGHTING POLE WITH TRUSS TYPE MOUNTING BRACKETS. THE CLAMPS SHALL BE SIZED TO FIT A 4 3/4" O.D. POLE. ARM SHALL HAVE WIRE INLET HOLE AND RUBBER GROMMET OR BUSHING NEAR THE POLE END FOR OVERHEAD WIRING USE. THE MAST ARM SHALL MEET THE SPECIFICATION AS PROVIDED FOR BY THE MISSOURI HIGHWAY & TRANSPORTATION COMMISSION FOR ROADWAY LIGHTING. (CU 107046) STANDARD CAST ALUMINUM TRANSFORMER BASE WITH CAST ALUMINUM REMOVABLE DOOR TO BE USED WITH METAL STREET LIGHT POLES HAVING 6-1/2" TO 9" DIAMETER. EACH BASE TO BE FURNISHED WITH A 1/2" - 13" TAPPED HOLE FOR GROUNDING. FURNISH UNION METAL TYPE APA 2850. FOUR 1" DIAMETER HIGH STRENGTH STEEL (MEETING ASTM A325) GALVANIZED BOLTS, COMPLETE WITH HEX NUTS, LOCK WASHERS, AND FLAT WASHERS SHALL BE FURNISHED WITH THE BASE TO MOUNT THE POLE. ** HARDWARE TO BE PREPACKAGED TOGETHER FOR EACH BASE AS FOLLOWS: 4 EACH 1"-8X4" GALV. HEX HEAD BOLT. 4 EACH 1"-8 THREAD HEX NUT. 4 EACH 1" FLAT WASHER. 4 EACH 1" LOCK WASHER. 4 EACH 1" SPACING WASHER. 2-3/4" X 1-1/16" X 1/2". NOTE: BREAK-AWAY BASE HEIGHT 17 INCHES. (CU 141056) LARGE SERVICE PEDESTAL (CU STANDARD USP-OHLS). WITH ABOVE GRADE (NON-VENTED) COVER * 1. GREEN COLOR, INCLUDES FASTENING HARDWARE WITH A PENTA-HEAD BOLT AND HASP ON EACH END. SHIPPED FULLY ASSEMBLED. 2. CONSTRUCTED OF UV MATERIAL, AND CAPABLE OF WITHSTANDING BACKFILLING OPERATIONS. MUST HAVE A MINIMUM RATING FOR INCIDENTAL TRAFFIC PER WESTERN UNDERGROUND GUIDELINE 3.6.. 3. NO METAL BRACKETS.
