The product shall be a WING or equivalent brand, gray colored air holding tube for an Almar South Coast marine patrol vessel. Similar to the picture attached. Please note: tube # is worn, but appears to be ERX6147RJ212 (see attached photo). The air holding tube shall be 24 inch tube diameter with extra fending over circumference of tube at bow. Tube shall have (5) compartments with pressure relief & fill ports (C7 inflation valves) in each compartment located above attachment flanges. The sponson shall be 40 oz polyurethane fabric. There should also be a double layer of tube fabric below the fender strip, full length of tube. 19” transom attachment flanges (loose) Two quick release straps/loops (4 total) to secure a boat hook on the inside gunnel of the tube both port and starboard. D-Ring & “roper G’s for 5/8” outboard safety lines. Black safety line included 7/16” bolt-rope, located 2” from tube, to center of rope.
