Engine • Yanmar 4TNV88C • Displacement 2.19 L (134 cu. in.) • Non-Road Emission Standard EPA Final Tier 4/EU Stage IV • Net Power 26.8kW (35.9 hp) at 2,400 rpm • Auto shutdown • Engine preheater • Fuel/water separator • Key start switch with an electric fuel shutoff • Single dry-type air filter • Block heater Powertrain/Undercarriage • Each track independently driven by hydrostatic 2-speed axial-piston motor connected to 2-stage planetary gear-reduction box • Travel Speeds - Low: 2.5 km/h (1.6 mph) / High: 4.2 km/h (2.6 mph) • Rubber Tracks, 400 mm (16 in.) • Propel motor shield Upperstructure: • 360 – deg rotation • Counterweight, 700 kg (1,543 lb.) • Hinged service-access doors • Toolbox • ROPS/TOPS/FOPS (cab) with air conditioning and heater • Vandal protection for service doors, fuel cap, and toolbox • Zero-tail-swing configuration • Swing Speed: 9.0 rpm • Swing Brake: Spring applied, hydraulically released, automatic, disc type • Independent Swing Boom o Left: 80 deg. o Right: 60 deg. Hydraulic System • Closed-center load sensing with 1 variable-displacement pump • Pump Flow: 120 L/m (31.7 gpm) • Auxiliary Flow: 87.4 L/m (23.1 gpm) • Auto-idle • Auxiliary Function right-hand pilot-lever control • Auxiliary hydraulic lines with quick couplers to the end of the boom • Diverter valves on boom. • Auxiliary return-flow selector valve • Axial-piston swing motor • Boom-swing foot control • Excavator-to-backhoe control pattern change valve • Hydraulic pilot-operated controls for boom, arm, bucket, swing, boom swing, travel, and auxiliary functions • Wet-disc swing brake
