Ten (10) Certified Category III-3 Instrumentation Grade Laboratory Power Protection System: • One (1) each for Illumina NextSeq 1000/2000 Sequencing System • One (1) each for Oxford Nanopore PromethION • One (1) each UPS dual true online 3000VA/2740W Single-Phase • Two (2) each UPS dual true online 2000VA/1850W Single-Phase • Two (2) each for ABI Quant Studio 3/3D or Real-Time PCR with computer & Monitor • One (1) each for DELL EMC PowerEdge T640 Workstation/Server for Sequencing Equipment • Two (2) each for Extended Run Time: Matching Battery Cabinets Includes: • Must be able to provide laboratory quality alternative power during the following: Voltage sag due to electrical devices starting in the building, or external loads. Voltage surges due to power grid, weather or grid load switching. Over voltage; Under voltage (brown out); Variable frequency, and or Switched transients • Minimum Backup time: Approximately 10 minutes under any load conditions. • Must be Certified Category III–Class 3 products. This is the highest level of technology available in the market, conforming to IEEE/IEC 62040-3 specifications and assuring an electrical source for instruments which meets US HHS CMS (HCFA) 42 CFR Part 493 (CLIA) and FDA 21 CFR Part 11 compliance. Meets Section 510(k) 21 CFR Part 807 Sub Par E as applicable. • Must be an ISO 9001:2015 certified company, which defines quality and documentation practices. Must be able to provide this certificate upon submission of quotation. • Pluggable Unit – Input & Output: Rated and configured for the listed instrument • Input, 120 VAC: Provided with a NEMA 5-20P Plug on a 6’ Power cord, except 3kva unit, NEMA L5- 30 • Output, 120 VAC with correct power and receptacles to match the listed equipment. • Desired Maximum Envelope dimensions in: 17”H x 4” W x 21” D units • Maximum installed weight 80 lb. • Two (2) years warranty on parts and labor
