1. Cab & Chassis 1.1. GVWR: 19,500 lbs. 1.2. Frame: 540,000 RBM (Resisting Bending Moment) - Bidder must provide section modulus and yield strength below 1.3. Cab and Axle Positions 1.3.1. Cab to Axle (CA): 60” 1.3.2. Center of rear axle to end of frame (AF): 49” *Values given here are minimums. The space between cab and body shall not exceed 10 inches. Truck vendor and body manufacturer/upfitter shall coordinate in selecting a cab to axle dimension that works with the specified body and ensures proper load distribution to the front and rear axles in accordance with manufacturer specifications and industry practice. The required AF must be achieved with factory frame rails. Frame extensions to meet the required AF are not allowed. The AF must be sufficient to allow support of the full length of the body. 1.4. Cab 1.4.1. 4-door, crew cab 1.4.2. Tinted safety glass 1.4.3. Cab entry handles, driver & passenger side 1.4.4. Outside mirrors, driver & passenger side, power adjustable & heated 1.4.5. Manufacturer’s highest level sound insulation package 1.4.6. Gauge package including the following gauges: 1.4.6.1. Air cleaner restriction (can be located under hood on air cleaner box) 1.4.6.2. Coolant temperature 1.4.6.3. DEF 1.4.6.4. Fuel 1.4.6.5. Oil pressure 1.4.6.6. Speedometer 1.4.6.7. Tachometer 1.4.6.8. Voltmeter 1.4.6.9. Gear indicator 1.4.6.10. Odometer 1.4.6.11. Total engine hours 1.4.6.12. Trip odometer 1.4.6.13. Auto transmission oil temperature 1.4.7. Dual sun visors 1.4.8. Two (2) cup holders 1.4.9. 3-point seat belt for each seat. If available, all seat belt webbing should be manufacturer’s high visibility color (Orange, Red, Green, or Yellow). Color will not be used as basis of award. 1.4.10. Climate control, including air conditioner, heater, & defroster 1.4.11. Power windows & power door locks 1.4.12. Tilting & telescoping steering wheel 1.4.13. Power steering 1.4.14. Dual note electric horn(s)
