a) Examples: 2024 John Deere 331P, Takuechi TL12V2 or TPWD approved equivalent b) Engine: i) Diesel Type ii) Displacement: Minimum One hundred eighty-six point 3 (186.3) cubic inch to Two hundred thirty (230) cubic inch iii) Travel Speed: Minimum Five (5) miles per hour to eight point five (8.5) Miles per hour c) Electrical: Must run on twelve (12) volt system d) Track Width: Minimum Fifteen point eight (15.8) inches to maximum seventeen point seven (17.7) inches e) Ground Pressure: Minimum 4.8 pounds square inch (psi) to Maximum 4.9 psi f) Ground Clearance: Minimum Nine point eight (9.8) inches to maximum Twelve point six inches (12.6) g) Cab: Enclosed i) Air conditioning – must include ii) Heater – must include iii) Radio – must include h) Hydraulic Pump: Must be high flow with minimum thirty nine gallons (39 gpm) per minute to forty point four gallons(40.4 gpm) per minute i) Technical Specifications i) Fuel Capacity (gal/l): 29.5 minimum – 31.6 maximum ii) Height to Hinge Pin: Minimum 10ft 10in to 11ft. iii) Dump Reach: Minimum Twenty- nine (29) inches to Forty inches (40) iv) Bucket Rollback: Minimum Thirty (30) degree to Thirty-five (35) degree Maximum v) Angle of Departure: Thirty Degree (30) vi) Dump Angle: Minimum 46.8 degree to 48 degree Maximum vii) Tipping Load: Minimum 8,857 pounds to 11,737 pounds maximum viii) Bucket Breakout Force: Minimum 7,874 pound to 10,325 pounds maximum ix) Front Turn Radius: Minimum 7 feet 2 inches to 8 feet 2 inches maximum x) Machine Length with Bucket: Minimum 12 feet 7 inches to 13 feet 3 inches maximum xi) Machine Length without Bucket: Minimum 10 feet 5 inches to 10 feet 6 inches xii) Width without Bucket: Minimum 6 feet 5 inches to 6 feet 9 inches j) Seats: Number of Seats: one (1)
