Kershaw Correctional- Preferred brand, Parkson Rotopress screenings compactor model #RP-200, or equal to replace an existing unit. To include motor, gearbox, screw, and press body. Two (2) sets of Drawings, two (2) Operation and Maintenance Manuals. Note: No controls, solenoid valve, inlet chute, discharge piping or other ancillary equipment are included. Unit shall have overall dimensions of approximately 1.75’ H by 3.5” L by 2.5’ W Approximate weight is 550 pounds Unit shall be capable of handling 60 cu. Ft/hour of screenings Unit shall have the following connection sizes: Feed: 16” x 9” (approx.) (flanged) Filtrate outlet: 3” diameter (approx.) Trash outlet: 10” diameter (approx.) Materials of construction shall be as follows: Press housing: Type 304 stainless steel Shaft/screw: Type 304 stainless steel Splash guard: Type 304 stainless steel Spray bar: Type 304 stainless steel Drive unit shall be a helical-worm gear reducer 78.91:1 ratio, hollow shaft with a shrink disc. The unit shall be driven by a 2 HP motor, 230/460/V, 3φ, 6Hz. The Rotopress unit shall be factory assembled and tested and shall be shipped to the job site fully assembled. No field assembly shall be required (except for chutes and piping). All items Unit Prices must be inclusive of Freight FOB Destination
