MODULAR CART: Tops of units shall be constructed of stainless steel and polished to a uniform finish with a rolled front edge. Body shall be constructed of hi-tensile square aluminum tubing, 1 ¼”, 1” and 3” extruded, vertical radius corners with stainless steel overlay. Frame sections shall all be welded construction, ground and polished to a uniform finish. Body shall be complete with laminated front, end and rear panels with laminated rear apron on .050 aluminum. Units shall each have a stainless steel lower shelf, where applicable, with 6” rear access for utilities. Cam locking system shall be included with each unit to align and retain cart positioning when two or more units are joined. Each unit shall have a 12” solid tray slide on customer side. Units shall be mounted on 6” stainless steel legs. TRAY SLIDE: Tray slide shall be constructed of stainless steel with runners, and to be drop down / folding design. Tray slides to have led underlights. Units to be mounted at ADA approved tray heights. SNEEZE GUARD: Sneeze guard to be constructed of 1” dia. stainless steel tubing, all welded, ground and polished to a uniform finish. Sneeze guards, (2) end panels and top shelf are of 1/4” thick tempered glass, with all edges polished to a smooth finish. All glass is supported by stainless steel clamps which are welded to the frame. Unit to be included with adjustable front sneeze guard for self-service or full-service application. Unit is supplied with stainless steel flanges. SCOPE OF WORK: Dealer will be responsible for removal of existing serving line and installation of new serving line. New serving line to be connected to electrical by the installer. District to ensure all utilities will be ready prior to install. It will be dealers responsibility to confirm dimensions and get signed drawings before serving lines are put into production. Dealer and district must verify voltage and phase before ordering.
