3-POINT MULTI-DISC MOWER WITH TOPPING KIT - 1. HITCH AND MOWER LIFT A. Mower must be compatible for use on standard agricultural tractors with up to 105 PTO HP at 540 RPM. B. Mower must be capable of mounting to Category II & III 3-point hitch systems. Hitch must be equipped with the extended left hitch pin to allow an 8-inch right offset mowing position. Hitch set-up to include all necessary components too completely mount the mower to either hitch size, including top 3rd link. C. Mower bar must have a mechanical adjustable breakaway system with backup or automatic reset (shear bolt type not acceptable). D. Mower bar must be raised and lowered hydraulically. Raising and lowering of the bar, while mowing, must not reduce mower disc RPM. E. There must be a retractable or removable parking stand used when mower is detached from tractor. F. Drive shaft must be completely covered with non-rotating shielding between tractor and mower as per OSHA requirements. Drive shaft must be a heavy-duty type. G. Mower drive must incorporate a torque protection system such as a V-belt drive to protect mower. H. Mower bar must automatically lock in a 90-degree position for transport. Operator must be able to release the lock mechanism without leaving the tractor seat. 2. MOWER A. Approximate weight 1,215-pounds B. Cutting width must be nominally 94 inches (7-foot, 10-inches)...
