PAINT: _____________ _____________ All painted surfaces to be properly shot blasted to bright metal. _____________ _____________ All frame structure to be galvanized steel. Entire frame structure shall be hot dipped galvanized after all welding is complete. The Galvanized coating shall be in accordance to ASTM 123/A 123M-2. _____________ _____________ The outer frame will be primed with two-part epoxy primer with an acrylic urethane color topcoat to match Dupont Paint Co. Stock No. N032-HP. Please show amount to Deduct (-) ___________ if trailers are provided with a standard factory color. _____________ _____________ Undercarriage to be powder coated to match color ordered.; GENERAL ASSEMBLY: _____________ _____________ The unit shall be a tandem axle, tilt bed type trailer with sliding axles and a maximum 9-degree load angle. _____________ _____________ The axles shall hydraulically slide toward the front of the trailer and shall hydraulically slide back into place after the trailer is loaded. The undercarriage shall roll on 4 greaseable rollers. The undercarriage shall sit in four fabricated frame-mounted steel pockets in road transport position. _____________ _____________ The axles shall lock in the transport position to ensure that they will safely remain in position in the event of a hydraulic hose or hydraulic cylinder failure. _____________ _____________ The trailer shall be equipped with two drawbar safety chains to meet SAE J697a recommendations or latest revision thereof; and a 12,000-pound minimum capacity screw or pin type adjustable stiff leg, capable of being locked in the upright and stored position for use when the trailer is not connected to the towing unit.; CAPACITY: _____________ _____________ The payload capacity of the unit, excluding the weight of the unit, shall be a minimum of 40,000 pounds at highway speed. _____________ _____________ GVWR to be a minimum of 48,000 pounds.
