Base Cabinets: 1. End panels, partitions, bottoms and shelves: Exposed end panels, partitions, bottoms and shelves to be ¾” thick red oak veneer core plywood. Unexposed end panels, partitions, bottoms and shelves to be ¾” thick Red Oak veneer core plywood. Unexposed end panels, partitions, bottoms and shelves to be ¾” thick birch or maple veneer core plywood providing light cabinet interiors behind closed doors. Exposed edges of components to be banded in red oak. Interiors of end panels and partitions to be drilled to receive dowel inserted edges of rails, bottoms and toe boards and bored for shelf clips where required. Bottoms machined for and provided with dowels (on maximum of 75mm centers) for insertion into end panels or partitions and grooved to receive cupboard backs. Cupboard base cabinet shelves to be ¾” thick veneer core plywood, provided full depth and adjustable on 1-1/4” (32mm) centers. 2. Top Frame: Cabinet top frame to be comprised of a front rail and a back rail. Front rail to be 4” x 1” hardwood having exposed edge red oak banded and end edges drilled and provided with three (3) dowels for horizontal glued insertion into cabinet end panels at front
