One (1) set of four single channels, variable-volume pipettes, one 0.1-2.5µL, one 0.5-10 µL, one 10-100 µL, and one 100-1,000 µL. One (1) manual handheld pipette repeater to include pipette, tip rack, and carousel holder One (1) multichannel, variable-volume pipette. Pipette to be 8 channels that vary from 2-20 µL. Two (2) refrigerated microcentrifugesto hold twenty-four 1.7 µL microcentrifuge tubes, contains rotor. 120 V and keypad controlled set up One (1) general purpose water bath, capacity 5 L. Interior dimensions minimum to be 6.1 x 11.8 x 5.99 in and outer dimensions maximum to be 9.7 x 14 x 9.1 in. Temperature ranges to 95 deg C. One (1) bead mill homogenizer for DNA/RNA extraction. This has the capacity to run 24 samples at a time and homogenize tissue for DNA extractions Two (2) Vacufuge centrifuge concentrator, 110 V. Holds 48 samples on included rotor, dimensions maximum 21 x 13 x 12 in. Uses integrated diaphragm vacuum pump Two hundred (200) cryo/freezer boxes for sample storage in freezers. Dimensions 5 x 5 x 2 inches, includes 100 cell dividers and has drain holes, with tight lids Ten (10) cases of 96-well microplates, each case containing 50 plates. This will have rounded square wells, clear plastic, and no lids Twenty (20) dividers for cryo/freezer boxes for sample storage in freezers. Dimensions are 4.8 x 4.8 x 1.3 in and hold 100 samples. Four (4) packages containing four anode buffer containers each. Anode buffer container must be compatible with Applied Biosystems Inc. 3500 Genetic Analyzer Four (4) packages containing four cathode buffer containers each. Cathode buffer containers must be compatible with Applied Biosystems Inc. 3500 Genetic Analyzer Two (2) sets of five tubes of 100 base pair DNA Ladder, each tube contains 50 µg. This must be compatible with agarose gel electrophoresis Four (4) SYBR safe DNA gel stain for use in agarose gel electrophoresis. Supplied at 10,000x and in DMSO
