4 each Ceiling mounted speakers • Low profile passive loudspeaker, less than 6 inches (155 mm) total depth • Supports both CAT6 shielded cables and standard speaker wiring • Designed to be integrated with a similar and/or like the AMP-450BP 2 each Ceiling mounted beamforming microphones • Beam tracking technology works out-of-box without any lobe aiming or room mapping • Single cable connection via CAT6 cable • LED mute status indicator 1 each Wall mounted touch panel control (exact location TBD) • 5-inch capacitive touchscreen with a minimum 800x480 resolution and 24-bit color depth • Contemporary design that compliments the aesthetics of any environment • Gorilla Glass screen that is tough, scratch-resistant, and smudge resistant 1 each 1 each Wireless handheld microphone Lavalier microphone • The two (2) microphones shall be multi-channel wireless access point. Use automated frequency coordination to assign clean frequencies to wireless microphones and manages two-way wireless transmission of encrypted audio and control signals. 1 each Install wireless microphone access point transceiver in the middle of the room for ample coverage. 1 each Install rack in back Diamond Head back corner of the DLIR Conference room and shall contain: • Audio Digital Signal Processor (DSP) 1. 128x128 channels of AVB 2. 12 microphones/line level inputs with AEC, 8 microphone/line level outputs GB ethernet port. • Network – similar to or like M4250 1. Pre-configured for audio and video over IP out of the box 2. Enable encoders and decoders to be connected with zero configuration. i. A VoIP system manager that is similar to or like NAVigator • One-Button Commissioning Report • Confidence Preview that enables viewing of the content from any NAV endpoint • API for third party control • Control Processor 1. Quad-core processor and four (4) times more memory with two (2) GB of RAM and 8 GB of flash 2. Supports TouchLink Pro Touch panels, eBUS devices, network button panels, and IPL EXP expansion interfaces
