Gyratory Compactor Pine part # AFG2A G2 Gyratory Compactor or Equal Non-Shear - 115V, 12A, 50/60Hz, AASHTO T 312, ASTM D6925 Non-hydraulic and capable of producing 150 mm (+/-0.1 mm) diameter hot mix asphalt specimens between 60 and 170 mm in height by compressing the specimen at 600 kPa (+/- 18kPa) while gyrating the specimen 30 +/- .35 mrad (1.16 degrees +/- 0.02 degrees)) and shall record specimen’s height to the nearest 0.1 mm (minimum precision 0.1 mm) every gyration (at least once per gyration) during compaction, built-in extruder, mounted on swivel castors or like devices to insure compactor mobility within the laboratory. The compactor shall be: • 875 mm wide x 900 mm deep x 1375 mm high (~34.5 inch x ~35.5 inch x ~54 inch) • Approximately 400 kg (880 lb) To include 5,000 lb Load Ring with Certification and Height Block w/ Certification To be delivered/shipped to: 399 25th ST NE Fayette AL 35555 Hours of Operation: 7am-4pm Mon.-Fri.
