Ornamental Security Fence Approved Model – Ameristar Impasse II – Gauntlet Style or approved equal, a spec sheet(s) shall be provided at time of bid submission. - Install approximately 742 LF of 7’ tall security. - Three-rail design - 2.75” wide Pales - 11 ga rails - 12 ga I beam posts. - Line post to be on 8’ centers, all posts set in concrete, minimum embed 36.” - Black “Perma-Coat” finish with 15-year warranty Ornamental Security Gate - Approved Model – Ameristar Passport IS – Gauntlet Style, Transport Traverse 11, or approved equal. - Install (1) 30 LF cantilever 7’ tall security gate. - Three-rail design - Black “Perma-Coat” finish with 15-year warranty Mower/Egress Gate chain link – PVC-coated Black Finish - (1) 10’ Single swing gate on hinges that can be locked with pad lock - Gate to match PVC-coated Black finish chain link fencing. Chain Link Fence – PVC-coated Black Finish - Install approximately 484 LF of 6’ tall with PVC-coated Black finish chain link fence. - with (3) strands of barbed wire black in color, 12.5-gauge, 4-point barbs, max 5” o.c. - 9-gauge fabric with 2” chain link mesh- PVC-coated Black finish. - 3" WT/LG40 corner, end and pull posts. PVC-coated Black finish. - 2" WT/LG40 weight line posts, PVC-coated Black finish. - 1-5/8" diameter, 20-weight, top rail, PVC-coated Black finish. - 7-gauge bottom tension wire, PVC-coated Black finish. - Line post to be on 10’ centers, all posts set in concrete. - Tie in new fencing to existing chain link fence post using all new mechanical ties and new barbed wire as needed.
