This project consists of installing non-residential commercial rated Ingress Protection (IP) Power over Ethernet (POE) security camera system consisting of the following components. All cameras are to be non-residential commercial rated, vandal resistant and IP rated for protection against dust and water intrusion. 6. NOTE: THIS IS A STANDALONE SYSTEM THAT IS NOT CONNECTED TO THE CHP NETWORK. A. Provide and install one (1) 4.0 Megapixel minimum Outdoor Day/Night Pan Tilt Zoom (PTZ). B. Provide and install five (5) 4.0 Megapixel minimum, Outdoor Day/Night 2.8mm minimum or varifocal lens IP camera, Turret Dome Camera. C. Provide and install five (5) 4.0 Megapixel minimum, Outdoor Day/Night 2.8mm minimum or varifocal lens, Bullet Camera. D. Provide and install five (5) 4.0 Megapixel minimum, Outdoor Day/Night 2.8mm minimum or varifocal lens, Multi-Sensor Dome Camera. E. If cameras cannot be hardwired, a point-to-point (PTP) wireless solution can be used with Aruba, Cisco, or Ubiquiti. Contractor will need to verify that power is available and that all required equipment can be installed at the locations needed. F. Cameras located near vehicle gates need to be of a quality to read vehicle license plates during the day and night...
