Rear Load Containers: • Containers shall have front panel sloped to allow for ease of dumping • 1 yard thru 8 yard all side panels/bottom must be 12-gauge steel. (No seams). • All corners must have continuous welded seams for strength. • 12-gauge formed top channel around container top. • 1” solid steel winch hook welded in the center on the outside of the top channel for dumping. • Trunnion Bar: o 1, 2 yard container 1 3/8” solid steel bar with keepers welded on both ends. o 3, 4 yard container 1 1/2” solid steel bar with keepers welded on both ends. o 6, 8 yard container1 3/4” solid steel bar with keepers welded on both ends. • 11/2” Removable drain plug. • 10-gauge full length bottom channel support. • 1 yard thru 8 yard containers must have (4) 7 gauge caster pads. • 2,3,4 yard containers must have (4) 6”X 2” swivel casters • 1/2” lid rod supported by 3/16“steel braces and brackets that are welded or bolted to the steel frame. • 1 ½” Removable drain plug. • Container must be primed inside and out. (Safety Orange Paint Required) • Lid design, plastic single wall, multiple ribs. • Include your brochure and container specifications for the above...
