A. All engineering design and related detailing of the bridge(s) shall be provided by the supplier. The design and detailing shall conform to the Applicable Codes and Standards listed in section 2 of this document and shall comply with structural drawings/plans prepared by JMT and this document. B. Bridge(s) and its attachments shall be fully fabricated by a qualified supplier as outlined in this document. C. Supplier shall be responsible for the delivery of all bridge materials. D. These specifications are for fully engineered clear span bridge(s) of aluminum construction and shall be regarded as minimum standards for design and construction. 1.2 Contractor to provide information on the proposed bridge fabricator for approval. Information provided shall include the following minimum criteria to be considered: A. Representative Design Calculations B. Representative Drawings C. Splicing and Erection Procedures D. Warranty Information E. Inspection and Maintenance Procedures PART 2 - APPLICABLE CODES AND STANDARDS 2.1 GOVERNING CODES AND STANDARDS: A. Bridge(s) shall be designed in accordance with the AASHTO, Guide Specification for Design of Pedestrian Bridges, latest edition, where applicable and unless otherwise stated in section 3 & 4 of this document. 2.2 REFERENCE CODES AND STANDARDS: A. AASHTO LRFD Guide Specification for Design of Pedestrian Bridges, 2009
