A Densifier shall have a minimum compression ratio of 85 to 1. B Densifier shall have a minimum rated capacity of 400 lbs/hr. C Densifier shall be able to melt Polystyrene, Polyethylene, and Polypropylene materials. D Specify overall height, width, and length of densifier with conveyor and confirm it will fit and be operational inside the existing building. E The product shall be identified by manufacturer, model, series, and year F Provide documentation certifying that normal operation of the machine does not create any harmful air emissions and does not violate any WISHA or OSHA requirements. A Specify electrical requirements. Existing available circuit is 480V, 3 Phase, 75 Amp. Changes to this will be at Bidder’s cost. B Provide and install floor mounted Control Panel for EPS Densifier. Indicate Control Panel size. Bidder to enlarge existing equipment pad at their own expense if needed...
