Basis-of-Design Product: Subject to compliance with requirements, provide one of the following products or comparable product. 1. Allsteel; Altitude A6. 2. Haworth; Planes. 3. HAT Collective; HAT. 4. MillerKnoll; Renew. 5. Teknion; HiSpace. 6. Teknion; Navigate. B. Height Adjustable Tables, General: 1. Height adjustable from standard desk height to 42-inch standing height. a. Electric with lifting capacity, including top: 1) Single straight top, up to 30x72 in size, 150 pounds minimum. 2) Extended corner top, up to 30x30x72x72 in size, 250 pounds minimum. b. Controls easy and quick to operate by user on daily basis. c. Pin and crank adjustments are not acceptable. 2. All necessary supporting hardware supplied. 3. Height Adjustable table sized to be “wrapped” on back and both ends. 4. Provide with integrated wire management. 5. Top: 1-1/4 inch thick minimum. 6. Edge: Extruded 2mm PVC edging. 7. Base: Metal T-legs. C. HAT1 - Workstation Height Adjustable Table: 1. Top: Plastic laminate, to match systems furniture worksurfaces. 2. Dimensions: Nominal 30 inches x 72 inches. 3. Modesty Panel: None 4. Accessories (refer to Section 2.4): a. Power Module: PM. 5. Quantity: 27 each. a. See 2.7 TYPICAL DESK CONFIGURATION for additional quantities. D. HAT2 - Office Height Adjustable Extended Corner Table: 1. Top: Plastic laminate, to match office systems casegoods. 2. Dimensions: Nominal 24 inches x 60 x 60 inches. 3. Handedness: Coordinate with plan layout. 4. Provide grommet in top, confirm location prior to order. Modesty Panel: None. 5. Accessories (refer to Section 2.4): a. Wire Management: WM. b. Power Module: PM. 6. Quantity: See 2.7 TYPICAL DESK CONFIGURATION for quantities.
