Contractor to Provide: 1. Prospective contractor shall perform the removal of existing Shingles and Felt. And the removal of all debris from project site. 2. Prospective contractor shall be responsible for all safety barriers like orange construction fence to keep bystanders out of work areas and at a safe distance or equivalent. 3. Prospective contractor shall be responsible for any permits that maybe required. 4. Prospective contractor shall furnish all materials, tools, labor, and equipment to install new drip edge and StormTread synthetic roofing underlayment or equivalent and a (class 3 impact) 60- mph wind architectural shingles Approx. (3,740 sq. ft. ) of roof area, to include roof over bulletin board. And Approx. (384’ lin. Ft. drip edge) and Approx. (106’ lin. Ft. vent ridge). 5. Prospective contractor shall remove and replace, approx. 68' of siding on stepped roofs to expose flashing and replace with new flashing and reinstall siding (replace if damaged in the removal process) and cut back decking and underlayment (approx.. 2” from center line of ridge for ventilation and to install new vent ridge. 6. The color of shingles shall best match existing (Weatherwood) and other roofs if close to the one that’s being replaced. 7. Prospective contractor shall install a premium starter strip around the eaves and rakes to help prevent wind uplift. 8. Prospective contractor shall nail the shingles with a minimum one inch in length and a minimum four nails per shingle. 9. Prospective contractor shall install the entire roof system to meet manufacturer’s specifications and any state, county, and city building codes. 10. Prospective contractor shall install new roof vent boots/jacks. Roof vent boots & flashing, and chimney flashing to be painted color to best match roof...
