The general scope of work for this project is as follows: a. Single/Multiple course Micro surfacing per Section 420 of the WVDOH 2025 supplemental specifications in areas as shown on location map b. Each road shown on the map shall be crack sealed prior to the application of Micro surfacing. c. Any base failure shall be repaired prior to Mirco Surfacing by saw cutting failure areas out and installation of Compacted 6” aggregate base followed by 6” of asphalt wearing course (full depth repairs) d. Where applicable Re-mark centerlines, lane lines, and channelizing lines on streets. Channelizing lines will be painted with Fast Dry Traffic Paint, Type II. e. Provide adequate signage and place cones as required to alert motorists/pedestrians that fresh paint is being applied. f. Replace crosswalks and stop bars where required, g. Crack sThe general scope of work for this project is as follows: a. Single/Multiple course Micro surfacing per Section 420 of the WVDOH 2025 supplemental specifications in areas as shown on location map b. Each road shown on the map shall be crack sealed prior to the application of Micro surfacing. c. Any base failure shall be repaired prior to Mirco Surfacing by saw cutting failure areas out and installation of Compacted 6” aggregate base followed by 6” of asphalt wearing course (full depth repairs) d. Where applicable Re-mark centerlines, lane lines, and channelizing lines on streets. Channelizing lines will be painted with Fast Dry Traffic Paint, Type II. e. Provide adequate signage and place cones as required to alert motorists/pedestrians that fresh paint is being applied. f. Replace crosswalks and stop bars where required, g. Crack seal all roads indicated on map. This should include all cracking on pavement and along curb and roadway surface. Crack sealant shall me specifications set forth by ODOT 702.17 Type II Crack sealant. Seal all roads indicated on map. This should include all cracking on pavement and along curb and roadway surface. Crack sealant shall me specifications set forth by ODOT 702.17 Type II Crack sealant.
