Installation of Wall-to-Wall Carpet/Carpet Tile 1. Carpet shall be laid wall-to-wall, by skilled workmen, following best commercial practices under qualified supervision. IT SHALL BE LAID DIRECTLY TO THE FLOOR. 2. Carpet shall run in the same direction with minimum number of seams and so installed that minimum number of sections are used. No seams shall occur at doorways and entry perpendicular to doors or entries. 3. Adhesive will be used to glue wall-to-wall carpet to the floor. 4. Edges not butting vertical surfaces of building shall be provided with vinyl reducer strips. 5. Prior to installing carpet, floors must be broom cleaned to remove all dirt and debris. Completed areas must be broom or vacuum cleaned, all spots removed, and carpeting left free of all threads or other debris incidental to the work. 6. Labor and Workmanship must be warranted for a period of two (2) years. 7. Installation shall commence no later than two (4) weeks after receipt of a purchase order or notice to proceed and continue without interruption until completion. All installations must be completed within a reasonable number of days or as specified by Maintenance Director or Designee. NOTE: This job will be scheduled by rooms and not the entire project as a whole. 8. No debris or trash generated by this work shall be disposed of on HGTC property or in HGTC dumpsters/trash receptacles. 9. Plastic/Vinyl reducer strips will be used during installation at the discretion of HGTC and approval by the Maintenance Director or Designee.
