Install Lighting at Employee Parking Area ***Furnish and install exterior lighting for new employee parking area.*** Proposed Work: • Furnish and install a new wood pole, RSXF2 fixture, and aerial wiring to the new pole at the front of the facility near the entrance gate and another one behind the water tower to cover the rear driveway entrance. Tie the new wiring to the nearest existing lighting circuits on the nearby pole and the building behind the water tower and provide photocells to operate the fixtures if necessary. • Furnish and install a new wood pole with (2) RSXF2 fixtures, and aerial wiring to the new pole near the back of the truck shed to light the employee parking lot. Tie the new wiring to the nearest existing lighting circuit on the nearby pole. • Furnish and install a new TWX3 LED wall pack on the end of the truck shed nearest the fence. Tie the new wiring to the nearest existing lighting circuit in the building and provide a photocell to operate the fixture.
