Furnish and install two (2) dry pit submersible wastewater pumps with premium efficiency motors. Pumps shall be Sulzer/ABS Model XFP 105J-CB2 PE430/4. The pumps shall be supplied with an ANSI flanged suction connection (6” minimum) and an ANSI flanged discharge connection (4” maximum). The pumps shall be capable of delivering 700 GPM at a total dynamic head of 160 feet while operating within 50% of BEP flow. Shut off head shall be a minimum of 188 feet. The motor shall be an integral part of the pump unit. The motor shall be a maximum of 58 HP. Motor speed shall not exceed 1800 RPM. Motor shall be rated for operation on 460 volt, 3 phase, 60 Hz electrical supply service. Each pump motor shall be equipped with 49 feet of power and control cable sized in accordance with NEC and CSA standards
