This work shall consist of furnishing and operating equipment when needed by the MaineDOT. The Department and each responsive, responsible bidder who meets the requirements and specifications may enter into a Contract to provide equipment with experienced operators to perform construction and maintenance work on an as needed basis. The Contractor with the lowest rate for the equipment in the equipment category with the appropriate attachments and capabilities will have first option to furnish the equipment. Equipment. Equipment required to operate on public ways shall be legally registered for the duration of the rental. This includes the Contractor renewing the registration prior to expiration during the rental. Contractor shall provide fuel, oil and grease. The equipment specifications and terms are as follows: Grader– 10,000 - 20,000 • Grader operating weight shall be not less than 10,000 pounds and not more than 20,000 pounds. • 4 wheel drive or all wheel drive. • Grade control system • Mold Board shall be no less than 10 ft. with side shift and pitch. • Graders furnished for shall be no older than Twenty years. • Grader shall have a 360-degree strobe light. Grader– 20,000 - 30,000 • Grader operating weight shall be not less than 20,000 pounds and not more than 30,000 pounds. • 4 wheel drive or all wheel drive. • Grade control system • Mold Board shall be no less than 11 ft with side shift and pitch. • Graders furnished for shall be no older than Twenty years. • Grader shall have a 360-degree strobe light. Grader– 30,000 - 40,000 • Grader operating weight shall be not less than 30,000 pounds and not more than 40,000 pounds. 4 wheel drive or all wheel drive. • Grade control system • Mold Board shall be no less than 12 ft. with side shift and pitch. • Graders shall come with an identified, manufacturer approved lifting point. • Graders furnished for shall be no older than Twenty years. • Grader shall have a 360-degree strobe light.
