Vendor will provide full coverage maintenance and repair services on the elevators listed. Vendor agrees to furnish all labor, materials, tools, and equipment necessary to provide an elevator maintenance and repair program. Vendor shall make all repairs or upgrades necessary for each elevator listed in this document necessary to obtain/maintain a Certificate of Operation granted by the State of Illinois Office of the State Fire Marshal – Elevator Division. Vendor will regularly and systematically examine, clean, adjust and lubricate as required, and if conditions warrant, repair, and/or replace elevator components including but not limited to: Elevator Machine: including worm and gear, thrust bearings, drive sheave, drive sheave shaft bearing; brake, including brake pulley, brake coil, brake contact, linings, and component parts. Motor and Motor Generator: including auxiliary rotating systems, (tachometer, regulators, and the like) motor windings, rotating elements, commutator, brushes, brush holders and bearings. Governor: including governor sheave and shaft assembly, bearings, contacts, and laws. All Idler Sheaves: including the deflector or secondary, car and counterweight, compensation, and related bearings; governor tension assemblies. Controller and Various Relay Panels: including all relays, contactors, solid state components, resistors, condensers, transformers, contacts, shunts, mechanical or electrical timing devices, computer devices. Selectors: including selector drive (tape, wire, or cable) and all mechanical and electrical drive components. Hoistway Door Interlocks: or locks and contacts, hoistway door hangers and tracks, bottom door guides and auxiliary door closing devices, hoistway limit switches. Guide Shoes: including roller or gibs or replaceable liners.
