Vendor to provide used railroad rail. To be completed as stated in the extended description line 1 with the vendor providing the necessary used railroad rail. Use recycled (used) railroad rails classified with a nominal weight of 130 lb/yd (pounds per yard) size or greater. Use only visibly straight recycled rails with no splices. The Engineer will verify rail nominal weights (manufacturer's stamp with lb/yd, date, etc.). Provide certification for nominal weight if the manufacturer's stamp is unidentifiable. This line item shall be used for all work paid using STATE funds. Vendor to install cribbing at slide location as directed by the Engineer. Extend wall cribbing 2 feet to 12 feet as directed by Engineer below the existing ground line. If bedded rock is encountered, install the cribbing to the bedded rock only. The engineer will direct changes if necessary to the procedure. Vendor to furnish all labor and equipment to deliver and install wall cribbing on the recycled (used) railroad rail piling. Wall cribbing shall be lapped, bolted, and attached solid to the drilled railroad rails. Use wall cribbing: recycled (used) steel "w" beam guardrail shall be supplied by the KY Dept. of Transportation. Bolts, tie wire, welding, etc. needed to make the cribbing panels and attach to the drilled railroad rails will be furnished by the vendor. The Vendor is responsible for picking up the (used) steel "W" beam guardrail at the local county Maintenance garage. Any unused (used) steel "W" beam guardrail shall be returned to the maintenance garage by the vendor...
