•Contractors to provide all labor, materials, equipment, and services necessary to install all fencing on this project. •New installation Approx. 50' Linear Feet of 7ft high black ornamental fence Ameristar Iron Montage 11 -2R classic fence. (Equal to or better). (2) single swing man gates to be installed. 4' x 7' gates with closures with panic hardware (Von Duprin Exit Device CD9847NL-US26D-3'-697-SNB). Add expanded metal on and around gate to prevent entry from the outside. •New installation Approx. 350 Linear Feet of 7' High Galvanized fence with 1 "x9 gauge fabric. (2) single swing man gates to be installed 4' x 7' gates with closures and panic hardware. (3) double swing gate to be installed (16', 10',8') x 7'. Provide 12" mow strip for all galvanized fencing, •Demo of approx. 100 Linear feet of existing fence and poles. Demo approx. 100 linear feet of fabric and dispose of. Sleeve existing poles and install approximately 100 Linear feet of 7' High Galvanized fence with 1 "x9 gauge fabric. Provide 12" mow strip for all galvanized fencing. Contractor to haul away demoed materials. •Demo and haul off approximately 75 square feet of concrete a round existing drain. Raise drain to create clear path of travel. Pour back and finish concrete. •Re-route and underground waterline between portables and patch back. •All measurements to be verified by the contractor prior to installation. •The contractor is responsible for having the area USA prior to installation. •Contractor to locate/GPR prior to removal of existing fence. •All man gates to be no smaller than 4 feet opening for ADA.
